Fixing the Maser Ultrasonic Rodent Repeller – Auto Model
Location
Maser Ultrasonic Rodent Repeller – Auto Model has to be installed under the bonnet of the vehicle away from the engine. Necessary cable is provided to connect it to the vehicle’s ignition system. Alternatively the wires provided can be connected to a switch specifically for this unit on the dashboard of the car.
Activating the Unit
If the unit is interfaced with the ignition, it will be automatically be “ON” when the ignition is switched “OFF” and the unit will be “OFF” when ignition is switched “ON”. If a switch is placed on the dashboard for this unit, it should be switched “ON” everytime the car ignition is switched “OFF” (Make sure the Power ON switch on the unit is switched “ON” at all times) The ultrasound produced by Maser Ultrasonic Rodent Repeller – Auto Model will bounce around under the bonnet of the vehicle to form an ultrasound field thereby protecting the vehicle’s accessories from rodents. The L.E.D on the machine will blink to indicate that the unit is working. Maser transducers are completely quiet. If you cannot hear them, do not think that the unit is not working. You cannot hear ultrasound.
Testing
the unit The unit comes with a test switch which will emit a “Beep Beep” sound when activated for testing. The power consumption is very negligible and will not have any noticeable effect on the battery. Maser Ultrasonic Rodent Repeller – Auto Model is designed specifically for use in automobiles only, and will not be very effective in other areas.
Guarantee
The machine Maser Ultrasonic Rodent Repeller – Auto Model is guaranteed for one year from the date of purchase by the user, against any defects in material or worksmanship.
Specifications:
| Power Supply |
12 Volts DC |
| Operating Frequency |
Above 20 KHz |
| Sound Output |
80 to 110 dB |
| Power Consumption |
< 60 mW |
| Weight |
300 gms. |
|